Search results for "alnico 5"

2 or “aged” Alnico 5 magnets. II/weakened Alnico 5 method also muddies the tone the longer the string sustains. Well, As a fan of Alnico 2 and aged Alnico 5 magnets, I can't fully agree with DiMarzio's perspective Anyway, here comes the technical mambo jambo Dimarzio Air Classic Neck (DP190) Magnet  – Alnico 5 Advertised Not as tight as many alnico 5 neck pickups like PAF Pro nor spongy like some humbuckers with alnico

First of all, the techical specs; Seymour Duncan ‘59(n) SH-1(Updated 09.02.26) Magnet – Alnico 5 Advertised I believe the easiest way to describe this humbucker is this; "precisely made Alnico 5 PAF clone for 5 magnet, muddiness can be your problem, especially on the wound strings. Swapping the magnet can be good alternative in two ways; i) swap the Alnico 5 magnet with an Alnico 4 bar or partial charged/unoriented rough cast alnico 5 magnets.

This guitar was the white 540P featured on the covers of Satriani's first albums. Hardware Color: Cosmo Black (for JS1200: Chrome) Tuning Machines: Gotoh Nut Width: 42 mm Last Fret Width: 58

Both pickups had lower windings, lower output, and alnico 5 magnets, but I’ll mention the nerdy stuff maple neck in a chunky Endur-Neck profile, a two-point steel tremolo, 25.5” scale, steel frets, Bourns 500K Dimarzio DP201 Al DiMeola Neck Magnet – Alnico 5 Advertised DCR: 10.87 K Ohm (Series) Measured DCR: 10.6880

Let's read my measuremens here; Dimarzio Norton DP160 Magnet – Alnico 5 Advertised DCR: 12.62 K Ohm ( In my Custom 5 review, I mentioned that a reading of 400G was the highest I had measured so far. 5-loaded powerful humbuckers. For instance, in my opinion, the Custom 5 is much tighter. 2 Pro, Jazz or even alnico 4 modded ’59 from Seymour Duncan.

…And, my measuremens are here; Dimarzio PAF 36th Anniversary DP223 Magnet – Alnico 5 Advertised DCR: Freq w/470pF: 2.6748 KHz Output: 285 Milivolts (advertised) EQ (B/M/T) – 6/6.5/5 (old catalog data) 4 Thanks to DiMarzio’s Airbucker technique, even though the pickup contains a long Alnico 5 magnet, the flux density I measured at the center of the pickup reads closer to Alnico 2 levels. On the other hand, generally speaking, lowerwind A2 neck humbuckers can suit fine like Alnico 2 Pro,

Try it with 500K pots for maximum treble and harmonic presence. motivation also played a role. :) Let’s read my measuremens here; Dimarzio Air Norton (DP193) Magnet – Alnico 5 Advertised DCR: 12,58 K Ohm (Series) Measured DCR: 12,74 K Ohm (Series) Inductance @100Hz: 6,39 H (Series) Measured C: -21,9 nF (Series) Output: 270 Milivolts (advertised) EQ (B/M/T) – 6,5/7/5 (old catalogs ) – 6/6/6/5,5 (official website) Gauss: 250G slug, 270G screw (measured at top center of pole pieces)

Floyd Rose tremolo with Japanese made stainless steel saddles, 25,5” scale, nickel silver frets, Alpha 500K They are wound with AWG43 wires (yes, i measured from a broken pickups coil), ~16-17K roughly DCR and alnico 5 magnets. Then, next i swapped the stock alnico magnet to unoriented sandcast alnico 5 that i’d bought from “Philadelphia 3.220 H (Slug Coil) Measured C: 92.2 pF (Series)/ 123.5pF (Slug Coil) Calculated Self Resonance Peak: 5.8887

…And, my measuremens are here; Oldtimer Bridge Magnet – Alnico 5 Advertised DCR: 8.4 K Ohm (Series) 5 Advertised DCR: 7.40 K Ohm (Series) Measured DCR: 7.3423 K Ohm (Series) Measured DCR: 3.7009 K Ohm 5. Around 200–220G on both the neck and bridge is actually a range that feels quite familiar from many Alnico more toward stronger PAF-style clones with a DCR in the 8.5–9.5K range and inductance somewhere around 5–

; Blues Saraceno with his plaid guitar Seymour Duncan Parallel Axis Trembucker -3 (PATB-3) Magnet – Alnico 5 Advertised DCR: 9K Ohm (now- several years ago it was 9.8K Ohm) (Series) Measured DCR: 9.1160 K Ohm Series) Measured DCR: 4.47 K Ohm (Screw Coil) Measured DCR: 4.66 K Ohm (Slug Coil) Inductance@100Hz: 5.6602H Resonance Peak: 6.00KHz (advertised) Advertised Resonance Peak: 6KHz Calculated Self Resonance Peak: 5.2280 Basses are tight, clear and pronounced thanks to alnico 5.

Let’s read the mambo jambo first; Dimarzio PAF Pro DP151 Magnet – Alnico 5 Advertised DCR: 8,4K Ohm (Screw Coil) / -59,4nF (Slug Coil) Output: 300 Milivolts (advertised) EQ (T/M/B) – 6/5/5 (old advertised Let’s saaay, hmm, Duncan ’59 is phenomenal humbucker but it picks guitars. tone pickups; german nickel silver base plate, plain enamel wire, buthyrate bobbins, vintage occurate alnico 5 alloys etc are all but a must.

It is a ’59, isn’t it? Player magazine, Joe recorded his great album Surfing with the Alien on a Kramer Pacer that had a ’59 You’ll get an alternative sound using other than standard magnets like Alnico 2, 3, 4, 5, and 7, etc. I like using traditional Alnico magnets for the tone I enjoy. We do experimentation with all kinds of rare earth magnets and I always come back to the Alnico’s for